ip1980 ฟ้อง 5201
LSVคลังสมองออนไลน์ "ปีที่21"
พฤษภาคม 14, 2024, 12:44:35 PM *
ยินดีต้อนรับคุณ, บุคคลทั่วไป กรุณา เข้าสู่ระบบ หรือ ลงทะเบียน

เข้าสู่ระบบด้วยชื่อผู้ใช้ รหัสผ่าน และระยะเวลาในเซสชั่น
 
   หน้าแรก   ช่วยเหลือ เข้าสู่ระบบ สมัครสมาชิก  
หน้า: [1]   ลงล่าง
  พิมพ์  
ผู้เขียน หัวข้อ: ip1980 ฟ้อง 5201  (อ่าน 4580 ครั้ง)
ps com
member
*

คะแนน0
ออฟไลน์ ออฟไลน์

กระทู้: 84


« เมื่อ: สิงหาคม 02, 2010, 09:40:10 AM »

ip1980 ฟ้อง 5201 ท่านใดทราบบ้างครับ มีวิธีแก้ไหมครับ ขอบคุณ


บันทึกการเข้า

ps com
member
*

คะแนน0
ออฟไลน์ ออฟไลน์

กระทู้: 84


« ตอบ #1 เมื่อ: สิงหาคม 02, 2010, 09:45:32 AM »

ไม่ต่อแท้ง ตลับเปลี่ยนแล้วครับ ฉงน
บันทึกการเข้า
nanaya
member
*

คะแนน1
ออฟไลน์ ออฟไลน์

กระทู้: 34


อีเมล์
« ตอบ #2 เมื่อ: สิงหาคม 18, 2010, 06:53:50 PM »

Service Call Error  (Canon)

 

No paper in the rear tray.[1000] E02

Paper jam. [1300] E03

Ink cartridge not installed, or not properly installed.[1401] E05

Ink cartridge temperature sensor error.[1403] E05

Non-supported in cartridge is installed.[1485] E05

Ink cartridge in a wrong position.[1486] E07

Multiple ink cartridges of the same color installed.[1487] E07

Ink cartridge hardware error [1682] E15

Ink cartridge not recognized.[1684] E14

The remaining ink amount unknown.[1686] E13

Ink cartridge not completely installed.[1687] E04

No ink. [1688] E16 (กดยืนยันการใช้งานต่อก็จะทำงานต่อได้)

Warning: The ink absorber becomes almost full.[1700] E08

The connected digital camera or digital video camera does not support Camera Direct Printing.[2001] E09

Non-supported hub [2002] E19

 

Carriage error [5100] An error occurred in the carriage encoder signal.

times Line feed error [6000] An error occurred in the LF encoder signal.

ASF cam sensor error [5700] This error takes place

Internal temperature error [5400] The internal temperature is not normal.

Ink absorber full (Japan:[5B00])(Others:[5B01])The ink absorber becomes full.

Print head temperature rise error [5200] The print head temperature exceeded the specified value.

EEPROM error [6800] [6801] A problem occurred in reading from or writing to the EEPROM.

VH monitor error [B200] The print head voltage is abnormal.

USB VBUS over current [9000]The USB VBUS is overloaded.

Other hardware error [9000] Replace the following item:- Logic board

Scanner error [5011] The scanner unit is faulty.

 

ลองดูอีกทีนะครับ
เยี่ยมมาก
บันทึกการเข้า
หน้า: [1]   ขึ้นบน
  พิมพ์  
 
กระโดดไป:  

Powered by MySQL Powered by PHP Powered by SMF 1.1 RC2 | SMF © 2001-2006, Lewis Media

lsv2555Please follow the new website at https://www.pohchae.com

Valid CSS!